Characteristics
- AC/DC
- three-phase
- Type
- asynchronous
- Protection class
- IP55, IP56
- Configuration
- aluminum-frame
- Number of poles
- 2-pole, 4-pole, 8-pole, 6-pole
- Other characteristics
- reversible, IE3, IE2
- Torque
-
Min.: 0.47 Nm (0.3467 ft.lb)
Max.: 71.9 Nm (53.0307 ft.lb)
- Power
-
Min.: 0.06 kW (0.082 hp)
Max.: 11 kW (14.956 hp)
- Rotational speed
-
Min.: 716 rpm (4,498.76 rad.min-1)
Max.: 2,940 rpm (18,472.56 rad.min-1)
Description
IE2 or IE3, IP55, multiple voltage multi-frequency, S1 aluminum body
Motive motors are built according to international standard regulations; each size throughout the construction forms is calculated with reference to the tables of standard IEC 72-1.
All motors are multiple voltage multi-frequency 50/60Hz, F class insulation, (H on request) S1 continuous duty service, IP55 protection (IP56, 66, 67, and 68 on request) IE2 or IE3 efficiency class tropicalized winding suitable for inverter power supply
IE2, high efficiency class IE 60034-30
IE3, premium efficiency class IE 60034-30
The copper is impregnated with a double layer of H class insulating enamel to ensure high resistance to electrical, thermal and mechanical stress. The phases are further isolated by another layer of Nomex film to protect the motors from the voltage peaks that usually occur when the motor is controlled by an inverter.
From type 90, a steel insert is provided in the bearing slot of the aluminum flanges, to resist to radial mechanical forces with a fair degree of security
Aiming the maximum protection, the motors are equipped with important details like the pull-resistant cable gland and the combination of bearings with two shields each with rubber seal rings
To protect them by the rust, motive motors are painted in silver RAL9006 colour
Bearings selected for their silence and reliability and, for the same objectives, the cage rotor is dynamically balanced.
Motive asynchronous three-phase delphi series motors are closed, and externally ventilated. The frame, up to 132 included, is made in die casting aluminium alloy, from size 160 up to 355 the frame is made in cast iron.